Hotel Dimming Circuit Schedule and Channel Mapping

YouTube Video

This video explains how to review the dimming circuit schedule for a hotel guest room project.

After the room lighting functions are confirmed, the next step is to map every circuit to a control channel.

The schedule usually lists room type, lighting name, control position, dimming requirement, and module channel.

This table is very important because it connects the drawing, wiring, panel label, and software programming.

For example, a bedside reading light, cove light, mirror light, and night light may all have different dimming requirements.

Each dimming circuit should be assigned to a specific dimming module channel.

The channel number should also match the actual terminal wiring on site.

If the table and the wiring do not match, the final button control will be wrong.

The installer should use the circuit schedule to check every output before closing the ceiling or wall panel.

The engineering team can also use the table to confirm which lights belong to each scene mode.

For example, welcome mode may turn on the cove light and entrance light at a preset brightness.

Reading mode may turn on the bedside light at a comfortable level.

Item	Recommendation
Communication	Use RS485 bus communication for stable hotel guest room control.
Control Logic	Map each wall panel button to the correct circuit, dimming channel, and scene mode.
Project Stage	Confirm drawings, wiring, and device selection before site installation.

RS485 is stable, wired, and suitable for multi-room engineering projects.

Yes. Labels such as Reading, Sleep, Master Off, Curtain, Bathroom, and scene names can be customized.

No. The final video keeps the original audio and adds English subtitles only.

Contact smartguestroom.com for hotel RCU, RS485 wall panel, gateway controller, and whole-room dimming project support.